This is our next generation 32″ overflow kit. The internal box comes with two 16″ removable weir/lids that are easily removeable to clean. By using two 16″ weirs and installing a brace in the center, attached to a double laminated front lip, these longer boxes are extremely rigid. The external box has a one piece euro-brace for added strength and uses 1″ replaceable slip style bulkhead fittings for the drains. We have now switch to a flush fit polycarbonate lid that will not bow overtime like the acrylic ones would. It is designed and optimized to flow between 1 – 1200 actual GPH (not the pump rated GPH, but real world tested GPH). We have been running this model in different configurations over the last 6 months and their performances exceeded all of our expectations. You will be impressed with how easy they are to get to run safely and silently.
The removeable weirs come in 2 varieties:
- Slotted – The slotted variety is the one we have been producing since the beginning. They are 0.5″ tall slots that allow for a smooth flow of water over the top. They stay clean longer and are easier to clean when they become dirty. They also produce the lowest rise of water inside the display when running.
- Short Toothed – This is a traditional toothed weir, like the ones used on most other systems. They are 1/4″ wide vertical slots with a 1/4″ space in between each slot.
There are options for ordering just one set of front weirs, or an additional set. You can order a second one of the same type (so you can always have one clean and ready to go), or if you are unsure which one you would like to use, you can purchase a second one of a different variety to try out. By ordering the second one along with the overflow, the price on shipping will not change. If you choose to order a second set at a later date, it will have additional shipping cost added. Either way, the additional weir is $20 more.
The system includes:
(1) – Black 32″ Slimline Internal Weir Overflow Box w/ removable front weirs/lids
(1) – Smoked External Box with Eurobrace and Clear Polycarbonate Flush Fitting Lids
(2) – 1.5″ Slip X Slip Bulkhead Installed in the Internal Weir Box
(4) – Gaskets for 1.5″ Bulkheads (two per bulkhead for each side of the tank)
(3) – 1″ Slip X Slip Bulkhead with Gasket
(1) – Acrylic CNC Machined 1.5″ Close Ended Bulkhead Wrench
(1) – Acrylic CNC Machined 1″ Open Ended Bulkhead Wrench
(1) – Acrylic 60mm Drill Template w/ Center Line, Level Line, and Water Line Etching
Dimensions:
32” Internal
L x W x H
32” x 1.5” x 6.5”
External w/ 1″ Drains
L x W x H
16″ x 4″ (4.4” with Spacer and Gasket) x 8”
*We hope to have some images of the larger overflows on the website shortly, but until then, these 3D CAD images will give you are representation of what the overflow looks like. If you have any questions, do not hesitate to email us with any questions.
